Central Carolina Scale sells and services Doran Scales and Weighing Equipment

Doran Scales and Weighing Equipment Spare / Replacement Parts

MODEL 8000XL REPLACEMENT PARTS LIST

PART NO. ................ DESCRIPTION
PCA0223 Main PCB Assembly, 115 VAC Not for use on 8000MIS Intrinsically Safe Indicator - refer to 8000IS Parts List

PCA0223D Main PCB Assembly, 230 VAC Not for use on 8000MIS Intrinsically Safe Indicator - refer to 8000IS Parts List Program Memory IC Not field serviceable

SUB0395 Touch Panel Assembly Includes face plate, switch assembly, and installation instructions. Not for use on 8000MIS Intrinsically Safe Indicator – refer to 8000IS Parts List.

SUB0396 Face Plate Only Includes face plate and instructions

SWI0104-B Inner Switch Assembly

SHP0099 Lens Replacement Glue Touch panel adhesive.

SUB0004-1 Foot Assembly Set Rubber feet; S/S 10-24 x 1 screw, sold in sets of 6 only

HDW0042 S/S Foot Sold singly, for 18"x18" & larger bases, 1/2-20 NF Thread

SUB0063-1 Power Cord Shielded, 8 ft long, 18/3 SJEOW, with chosorb, connector assembly, and
instruction sheet; connector unassembled.

CNT0019 Liquid-Tite Feed Thru For load cell, power cord & option inputs

CNT0256 Load Cell Connector/Plug

LBL0173-A Capacity Labels

FUS0020 Fuse, 1/2 Amp, Slo-Blo, 115 VAC Used on Main PCB Assembly PCA0223

FUS0019 Fuse, 1 / 4 Amp, Slo-Blo 230VAC Used on Main PCB Assembly PCA0223D

SUB0038-4 Battery 4 Ah, 6 Volt, lead acid,rechargeable, with terminals, and wires

XFR0029 Power Transformer For use on Main PCB

SUB0235 Calibration Port Cover Assembly Includes cover, gasket & screws

SUB0398 Gasket & Screw Set, Rear Panel 3 standard & 1 cross-drilled 10-32 S/S screws, rubber and metal washers and one rear panel rubber gasket.

GSK0024 Rubber Gasket, Rear Panel 10" x 6"

SUB0211 E Mounting Brackets- *(OLD STYLE)* Connects Base to Indicator Same as Option E. If the scale base does not have drilled and tapped holes on the side, this part MUST be used.

SUB0455 E Mounting Brackets- *(NEW STYLE)* Connects Base to Indicator Same as Option E. If the scale base does have drilled and tapped holes on the side, this part MUST be used.

SUB0417 Kit, 14” Atlas Column with Hardware

SUB0425 Kit, 20” Atlas Column with Hardware

SUB0426 Kit, 30” Atlas Column with Hardware

MAN0190 Dealer/Instruction Manual

MAN0191 Doran 8000 XL Operator’s/User Manual

SUB0397 Case Cover Assembly Touch panel included (Includes both SWI104-B & SWI105)

ENC0624 “U” Bracket Tilt Stand bracket for 8000XLM

SUB0210-1 Knob, "U" Bracket Adjust One Friction adjust knob with washers

ENC0586 Backplate Rear cover with cord wrap bracket (w/o battery bracket or battery)

SUB0041-1 Foot Switch Non Washdown – Cable Included

SUB0442 Calibration/Units Switch Replacement Kit Includes switches and caps

ENC0585 Battery Bracket

SUB0399 Sealing Plug Kit

70/70XL-042-C RS-232 Data Cable - Pigtail end. REV. 5.X

70/70XL-042-C1 RS-232 Data Cable - With 9 Pin Connector. REV. 5.X

70/70XL-042-C2 RS-232 Data Cable - With 25 Pin Connector. REV. 5.X

MSC0102 Scale Veils for 8000XL (5 or more)

Doran Parts Home

Please call (919) 776-7737 for more information or to request a quote