Central Carolina Scale sells and services Doran Scales and Weighing Equipment

Doran Scales and Weighing Equipment Spare / Replacement Parts

MODEL 8000 REPLACEMENT PARTS LIST

PART NO. ...................... DESCRIPTION

SUB0206 Main PCB Assembly, 115 VAC Not for use on 8000MIS Intrinsically Safe Indicator - refer to 8000IS Parts List

SUB0207 Main PCB Assembly, 230 VAC Not for use on 8000MIS Intrinsically Safe Indicator - refer to 8000IS Parts List

DSW0022 Program Memory IC Used on Main PCB; 27C256

SUB0042R Touch Panel Includes sheet of capacity labels; not for use on 8000MIS Intrinsically Safe Indicator - refer to 8000IS Parts List

SUB0004-1 Foot Assembly Set Rubber feet; S/S 10-24 x 1 screw, sold in sets of 6 only

HDW0042 S/S Foot Sold singly, for 18"x18" & larger bases, 1/2-20 NF Thread

SUB0063-1 Power Cord Shielded, 8 ft long, 18/3 SJEOW, with chosorb, connector assembly, and
instruction sheet; connector unassembled

CNT0019 Liquid-Tite Feed Thru For load cell, power cord & option inputs

LBL0082 Capacity Labels Applied to label insert card

SWI0042-C Card, Label Insert Inserted into touch panel pouch on back side FUS0020 Fuse, 1/2 Amp, Slo-Blo, 115 VAC Used on Main PCB Assembly

FUS0019 Fuse, 1/4 Amp, Slo-Blo, 230 VAC Used in P/N SUB0207

SUB0038-3 Battery 3.2 Ah, 6.3 Volt, lead acid, rechargeable, with terminals, wires, RTV

XFR0017 Power Transformer, 115 VAC For use on Main PCB

XFR0018 Power Transformer, 230 VAC For use on P/N SUB0207

SUB0235 Calibration Port Cover Assembly Includes cover, gasket & screws

SUB0085-2 Gasket & Screw Set, Rear Panel 24 standard & 4 cross-drilled 8-32 S/S screw with rubber and metal washers; rear panel rubber gasket w/ ESD foil

SUB0085 Rubber Gasket, Rear Panel 10" x 6" with ESD foil

SUB0211 E Mounting Brackets- *(OLD STYLE)* Connects Base to Indicator Same as Option E. If the scale base does not have drilled and tapped holes on the side, this part MUST be used.

SUB0455 E Mounting Brackets- *(NEW STYLE)* Connects Base to Indicator Same as Option E. If the scale base does have drilled and tapped holes on the side, this part MUST be used.

MAN0002 Operator's Manual

SUB0042 Case Cover Assembly Touch panel assembled

SUB0085-1 Rear Panel Screw Set 24 standard & 4 cross-drilled 8-32 S/S screws with S/S & captive rubber washers.

ENC0624 "U" Bracket Tilt Stand bracket for 8000M & 8000ISAC case

ENC0223 Backplate Rear cover with cord wrap bracket

SUB0210-1 Knob, "U" Bracket Adjust One Friction adjust knob with washers

LED0016 4 Segment LED, Red - HLCP-E100

LED0015 Display LED Red –

SUB0041 Foot Switch Non Washdown - Cable Included

MSC0085 Scale Veils For 7000/8000 (5pcs. or more)

Doran Parts Home

Call (919) 776-7737 or click above for a quote