Central Carolina Scale sells and services Doran Scales and Weighing Equipment

Doran Scales and Weighing Equipment Spare / Replacement Parts

MODEL 4200 REPLACEMENT PARTS LIST

PART NO................... DESCRIPTION

PCA0185 Main PCB Assembly, Standard Used on standard 4200, 115VAC
(Order this board if the PCB DOES have an “A” suffix in the PCB board serial number)

SUB0367 Main PCB Assembly, Enhanced Used on 4200 with Option Type 16; 22; 27; 28
(Order this board if the PCB DOES NOT have an “A” suffix in the PCB board serial number)

SUB0367-1 Main PCB Assembly, Enhanced With battery option

PCA0141 Display PCB Assembly, Old Style - Over/Accept/Under LED's

PCA0160 Display PCB Assembly, Digibar

PCA0173 Battery Charger Board

DSW0005 Program Memory IC Used on PCA0185 & SUB0367 specify 27C512

SWI0061 Touch Panel, Digibar Self adhesive

SWI0045 Touch Panel, Old Style Over/Accept/Under LED's, self adhesive

SWI0061-1 Touch Panel, Old Style for Battery Option Over/Accept/Under LED's, self adhesive
SWI0024 Red Toggle Switch

SUB0004-1 Foot Assembly Set Rubber feet; S/S 10-24 x 1" screw; sold in sets of 6

HDW0042 S/S Foot Sold separately, for 18"x18" & larger bases, 1/2-20 NF Thread

SUB0063-1 Power Cord shielded, 8 ft long, 18/3 SVT, with chosorb, connector assembly, and
instruction sheet; connector unassembled

CNT0019 Liquid-Tite Feed Thru For load cell, power cord & option inputs

LBL0111 Capacity Label

LED0004 thru 6 LED, Over/Accept/Under Yellow(5)/green(6)/red (4) annunciator, single bar LED;
used on old style 4200

LED0003 LED, LB/KG/OZ/NEG or MOT/ZERO/NET/GROSS Red 4 bar LED

LED0009,8,29 LED, DIGIBAR Used on Digibar bar graph display,specify color red (9), green (8) or
yellow (29), 10 bars per LED

LED0013 LED, Numeric One red display digit

FUS0019 Fuse, 1/4 Amp, Slo-Blo Used in Main PCB, 115 VAC

FUS0021 Fuse, 1/8 Amp, Slo-Blo - Used in Main PCB, 230 VAC

SUB0038-1 Battery, Lead-Acid, Rechargeable 3 Ah,12.6 Volt, used in tower type4200 only with Option Type 02 Battery Option

SUB0038-2 Battery, Lead Acid, Rechargeable 6.4 Ah, 12.6 Volt, used in 4200RSS and 4200M indicator with removable battery

SUB0235 Calibration Port Cover Assembly

SUB0086-1 Gasket & Screw Set, Tower & Rear Panel 24 standard & 4 cross-drilled 8-32 S/S screw with rubber and metal washers; rubber gasket for 12" tower rear panel with ESD foil

SUB0086 Rubber Gasket, Rear Panel - 16" x 7" with ESD foil

ENC0255 Rear Access Panel - 16" x 7", Stainless Steel

MAN0003 Operator's Manual for 4200 Scale

HDW0011 Bubble Level

SUB0202 16 Pin Flat Cable, 18" Interconnect from Main to SSR PCB

WCB0062-1 Cable, Flat, Main to Display PCB 6" cable to connect Main board to Display board with connectors at both ends

SUB0085-1 Rear Panel Screw Set 24 standard & 4 cross-drilled 8-32 S/S screws with S/S & captive rubber washers.

RLY0007 Solid State Relay, 3 Amp A/C - Used on optional SSR PCB 115 VAC

RLY0011 Solid State Relay, DC - 1 Amp 5-200 VAC

SUB0041 Foot Switch - Non Washdown – Cable Included

XFR0017 Power Transformer -4 wire, 8279739, Old Style

XFR0023 Power Transformer New Style -9 wire, 8279642

MODEL 4200RSS REPLACEMENT PARTS LIST

NOTE: Refer to above 4200 parts for common parts. Parts unique to 4200RSS are listed below.

WCB0062-2 Cable, Flat, Main to Display PCB 18" cable to connect Main to Display PCB with connectors on both ends FUS0014 Fuse 3 Amp, 250 Volts

MODEL 4200M REPLACEMENT PARTS LIST

NOTE: Parts unique to 4200M are listed below.

ENC0352 Access Panel Cover Stainless Steel

WCB0062-4 Cable, Flat, Main to Display PCB 12" cable to connect Main to Display PCB with connectors on both ends

SUB0087-1 Meter Gasket and Screw Set For meter style case only

Doran Parts Home

Call (919) 776-7737 or click above for a quote