Central Carolina Scale sells and services Doran Scales and Weighing Equipment

Doran Scales and Weighing Equipment Spare / Replacement Parts

MODEL 7000XL REPLACEMENT PARTS LIST
Note: For OLD style cases with 16 screws for serial numbers XL704999 and lower.
PART NO. DESCRIPTION
[For units with 16 screw backplates.]

SUB0408 Main PCB Assembly, 115 VAC
SUB0316D Main PCB Assembly, 230 VAC
DSW0001 Program Memory IC
(Specify Revision) Used on Main PCB, 27C256
SWI0066 Touch Panel
SUB0004-1 Foot Assembly Set
Rubber feet; S/S 10-24 x 1 screw sold in sets of 6 only
HDW0042 S/S Foot
Sold singly, for 18"x18" & larger bases, 1/2-20 NF Thread
SUB0063-1 Power Cord
Shielded, 8 ft long, 18/3 SJEOW,
with chosorb, connector assembly,
CNT0019 Liquid-Tite Feed Thru
For load cell, power cord & option inputs
FUS0019 Fuse, 1/4 Amp, Slo-Blo
Used in Main PCB, 115 VAC
FUS0021 Fuse, 1/8 Amp, Slo-Blo
Used in Main PCB, 230 VAC
XFR0025 Power Transformer, 115/230 VAC
For Old style Main PCB,7 wire, 8279713
XFR0027 Power Transformer, 115/230 VAC
For 7000/7000XL-004-1, 8pin, (SPW1202 HZ)
SUB0235 Calibration Port Cover Assembly
Includes cover, gasket & screws
SUB0085 Rubber Gasket, Rear Panel

MODEL 7000XL REPLACEMENT PARTS LIST
Note: For OLD style cases with 16 screws for serial numbers XL704999 and lower.
[For units with 16 screw backplates.]
6" x 10", with ESD foil
SUB0085-2 Gasket & Screw Set, Rear Panel - 24 standard & 4 cross-
drilled 8-32 S/S screw with rubber and metal washers;
rear panel rubber gasket w/ESD foil.
SUB0211 E Mounting Brackets- *(OLD STYLE)* Connects Base to Indicator
Same as Option E. If the scale base does not have drilled and tapped
holes on the side, this part MUST be used.
SUB0455 E Mounting Brackets- *(NEW STYLE)* Connects Base to Indicator
Same as Option E. If the scale base does have drilled and tapped
holes on the side, this part MUST be used.
SUB0417 Kit, 14” Atlas Column with Hardware
SUB0425 Kit, 20” Atlas Column with Hardware
SUB0426 Kit, 30” Atlas Column with Hardware
MAN0123 Doran 7000XL Dealer / Instruction Manual
7000XL-027 Case Cover Assembly
With touch panel (backplate not included)
SUB0085-1 Rear Panel Screw Set - 24 standard & 4 cross-
drilled 8-32 S/S screws with S/S & captive rubber washers
SUB0210-1 Knob, "U" Bracket Adjust
One Friction adjust knob with washer
SUB0041 Foot Switch Non Washdown - Cable Included
70/70XL-042-C RS-232 Data Cable - Pigtail end. REV. 5.X
70/70XL-042-C1 RS-232 Data Cable - With 9 Pin Connector. REV. 5.X
70/70XL-042-C2 RS-232 Data Cable - With 25 Pin Connector. REV. 5.X