Central Carolina Scale sells and services Doran Scales and Weighing Equipment

Doran Scales and Weighing Equipment Spare / Replacement Parts

MODEL 7000 XL REPLACEMENT PARTS LIST
Note: For NEW style cases with 4 screws for serial numbers XL705000 and higher.
PART NO. DESCRIPTION
[ For units with 4 screw backplates.]

SUB0408 Main PCB Assembly, 115 VAC
SUB0408-1 Main PCB Assembly, 230 VAC
SWI0104-B Inner Switch Assembly
SUB0439 Face Plate Only
Includes face plate and instructions
SUB0427 Touch Panel Assembly
Includes: overlay, switch, and installation instructions
SHP0099 Lens Replacement Glue
SUB0004-1 Foot Assembly Set
Rubber feet; S/S 10-24 x 1 screw sold in sets of 6 only
HDW0042 S/S Foot
Sold singly, for 18"x18" & larger bases, 1/2-20 NF Thread
SUB0063-1 Power Cord
Shielded, 8 ft long, 18/3 SJEOW,
with chosorb, connector assembly,
CNT0019 Liquid-Tite Feed Thru
For load cell, power cord & option inputs
CNT0256 Load Cell Connector/Plug
FUS0019 Fuse, 1/4 Amp, Slo-Blo
Used in Main PCB, 115 VAC
FUS0021 Fuse, 1/8 Amp, Slo-Blo
Used in Main PCB, 230 VAC
XFR0027 Power Transformer, 115/230 VAC
For 7000/7000XL-004-1, 8pin, (SPW1202 HZ)
SUB0235 Calibration Port Cover Assembly

MODEL 7000XL REPLACEMENT PARTS LIST
Note: For NEW style cases with 4 screws for serial numbers XL705000 and higher.
[ For units with 4 screw backplates.]
Includes cover, gasket & screws
SUB0442 Calibration/Units Switch Replacement Kit
Includes switches and caps
GSK0024 Rubber Gasket, Rear Panel
SUB0438 Gasket & Screw Set, Rear Panel
Includes: 3 standard, 1 cross-drilled 10-32, and 4 rubber bonded
metal washers; rear panel rubber gasket.
SUB0211 E Mounting Brackets- *(OLD STYLE)* Connects Base to Indicator
Same as Option E. If the scale base does not have drilled and tapped
holes on the side, this part MUST be used.
SUB0455 E Mounting Brackets- *(NEW STYLE)* Connects Base to Indicator
Same as Option E. If the scale base does have drilled and tapped
holes on the side, this part MUST be used.
SUB0417 Kit, 14” Atlas Column with Hardware
SUB0425 Kit, 20” Atlas Column with Hardware
SUB0426 Kit, 30” Atlas Column with Hardware
MAN0190 Dealer Manual
MAN0192 Operator User Manual
SUB0441 Case Cover Assembly
With touch panel (backplate not included)
ENC0624 "U" Bracket
Tilt stand bracket for case.
ENC0604 Backplate
Rear cover, no screws
SUB0210-1 Knob, "U" Bracket Adjust

7000XL PARTS LIST
[ For units with 4 screw backplates.]
One Friction adjust knob with washer
SUB0041-1 Foot Switch
Non Washdown - Cable Included
70/70XL-042-C RS-232 Data Cable - Pigtail end. REV. 5.X
70/70XL-042-C1 RS-232 Data Cable - With 9 Pin Connector. REV. 5.X
70/70XL-042-C2 RS-232 Data Cable - With 25 Pin Connector. REV. 5.X
MSC0085 Scale Veils For 7000XL
(5pcs. or more)

Doran Parts Home

Please call (919) 776-7737 or email us for more information or to request a quote